Determination of Combustion Characteristics of Densified Biomass Fuels from Agricultural and Domestic Wastes

Obi, O. E. *

Department of Mechanical Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

Mong, O. O.

Department of Mechanical Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

Nleonu, E. C.

Department of Chemistry, Federal Polytechnic Nekede, Owerri, Imo State Nigeria.

Kalu, P. N.

Department of Agricultural and Bio-environmental Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

Onyeocha, C. E.

Department of Agricultural and Bio-environmental Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

Ndubuisi, C. O.

Department of Agricultural and Bio-environmental Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

Onwukwe, I. E.

Department of Mechanical Engineering, Federal Polytechnic Nekede, Owerri, Imo State, Nigeria.

*Author to whom correspondence should be addressed.


Abstract

The combustion characteristics of two carbonized biomass briquettes fuels samples (sample A and B) from two bio-wastes have been presented. Sample A is comprised of Agro-waste (residues) mainly rice husk, groundnut shell, corn cob, bagasse, rice straw, coconut coir, branches, wheat straw, maize husk, grass from the field, cassava stem while Sample B comprised of decaying domestic wastes material from wastes disposal/collection points mainly garbage, vegetables/fruits, protein, groundnut shell, maize cob, waste papers, all sorts of discarded foods etc. Analysis of briquettes fuels samples in terms of proximate analysis, ultimate analysis and calorific values were necessary to determine suitability of such material as reliable and sustainable energy sources. These parameters analyzed are unique fundamental code that characterizes and determines the properties, quality, potential applications and environmental problems related to any fuel. The result of the analysis placed sample B above sample A in terms of heating value. The proximate analysis indicated that the sample B had a better ignition characteristic at 77% volatile matter against 44% of sample A. Also, sample B have better heating value with fixed carbon 32% against 21% of sample A. This was also confirmed by ultimate analysis where sample B recorded a higher value of percentage Carbon and percentage Oxygen at 47.04% and 41.6% respectively. The bulk densities were in the range of 499kg/m2 to 502kg/m2 which is very good in terms of handling and transportation of the fuels. Moreso, calorific value of both samples were appreciably high at 18704 KJ/Kg for sample A and 18901.3 Kj/Kg by sample B. The ratio FC:VM for sample A is 0.477 which is higher than that of sample B, indicating that sample A will have a better yield and formation of biochar. Therefore the carbonised biomass briquettes are of good quality and exhibited good combustion properties as an alternative energy feedstock for domestic and industrial applications. It is a better source of energy for cooking, replacing fuel wood (firewood) and it is eco friendly.

Keywords: Densified biomass, briquettes, fuel wood, pyrolysis, calorific value, proximate analysis, ultimate analysis, agro-waste, municipal solid waste


How to Cite

Obi, O. E., Mong, O. O., Nleonu, E. C., Kalu, P. N., Onyeocha, C. E., Ndubuisi, C. O., & Onwukwe, I. E. (2023). Determination of Combustion Characteristics of Densified Biomass Fuels from Agricultural and Domestic Wastes. Journal of Energy Research and Reviews, 15(2), 26–34. https://doi.org/10.9734/jenrr/2023/v15i2304

Downloads

Download data is not yet available.

References

United States Energy Information Adminstration USEIA; 2022. Available:https://www.eia.gov/energyexplained/biomass/

Olanrewaju F, Andrews G, Li H, Phylaktou H, Bioenergy Potential in Nigeria, Chemical Engineering Transactions. 2019; 74:61-66. DOI:10.3303/CET1974011

Simonyan KJ, Fasina O, Biomass resources and bioenergy potentials in Nigeria, African Journal of Agricultural Research. 2013;8(40):4975-4989. accessed 14.10.2017.

Park CS, Roy PS, Kim HS, Current Developments in Thermochemical Conver-sion of Biomass to Fuels and Chemicals. Gasification for low-grade feedstocks. ed. Yongseung Yun, IntechOpen. 2018:19–41.

DOI:https://dx.doi.org/10.5772/intecho-pen.71464

Saeed MA, Irshad A, Sattar H, Andrews GE, Phylaktou HN, Gibbs BM, Agricultural Waste Biomass Energy Potential in Pakistan, In: International Bioenergy (Shanghai) Exhibition and Asian Bioenergy Conference, 21-23 October Shanghai, White Rose; 2015. DOI:dx.doi.org/10.5071/IBSCE2015-1CO.1.2

Vassilev SV, Baxter D, Andersen LK, Vassileva CG. An overview of the chemical composition of biomass. Fuel. 2010;89: 913–33.

Ajimotokan HA, Ehindero AO, Ajao KS, Adeleke AA. a , Ikubanni PP, Shuaib-Babata YL. Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates Scientific African. 2019:2468-2276. DOI:https://doi.org/10.1016/j

P Jha P, B Dass B. Analysis of Biomasses For Their Thermochemical Transformations To Biofuels. Int. J. of Energy Prod. & Mgmt. 2020;5(2):115-124.

DOI: 10.2495/EQ-V5-N2-115-124

ASTM D3175-17, Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke, ASTM International, West Conshohocken, PA; 2017.

Available:www.astm.org .

ASTM D5142-02, Standard Test Methods For Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures, ASTM Interna- tional, West Conshohocken, PA; 2002.

Available:www.astm.org .

Matti H. Combustion of Different Types of Biomass in CFB Boilers, Presented at 16 European 27th Biomass Conference, Valencia Spain; 2008.

Saidur R, Abdelaziz EA, Demirbas A, Hossaina MS, Mekhilef S. Review on biomass as a fuel for boilers. Renewable and Sustainable Energy Reviews. 2011;(15):2262–2289.

DOI:10.1016/j.rser.2011.02.015

ASTM E711-87, Standard Test Method For Gross Calorific Value of Refuse-Derived Fuel By the Bomb Calorimeter, ASTM International, West Con- shohocken, PA; 2004;1987.

Available:www.astm.org

Iyer PVR, Rao TR, Grover PD. Biomass Thermo-Chemical Characterization, Chemical Engineering Department, IIT Delhi; 2002.

Patel B, Gami, B Biomass Characterization and its Use as Solid Fuel for Combustion. Iranica Journal of Energy & Environment. 2012;3(2):123-128.

DOI: 10.5829/idosi.ijee.2012.03.02.0071

Jigisha P, Channiwala SA, Ghosal GK. A correlation for calculating elemental composition from proximate analysis of biomass materials, Fuel. 2007;86:1710–1719.

Das B, Characterisation of Biomass/Agro Residues and Application of Selected Biomass for Sorption of Phenol from Aqueous Solutions. PhD Theses submitted to SLIET University, Longowal, India; 2016.

Nhuchhen D, Afzal M, HHV predicting correlations for torrefied biomass using proximate and ultimate analyses, Bio-engineering 2017; 4(1):7 .

Mong OO, Obi OE, Onyeocha CE, Ndubuisi CO, Gaven DV, Nnadiegbulam V. Journal of Energy Research and Reviews. 2023;14(4):22-31.

DOI: 10.9734/JENRR/2023/v14i4290

Yirijor J, Arhin E, Agyepong L, Badu G, McBagonluri F. Investigation of the mechanical and combustion characteristics of cocoa pod and coconut husk composite briquette. Journal of Materials Science Research and Reviews. 2022;9(3):29-38.

Acar, S. and Ayanoglu, A. Determination of higher heating values (HHVs) of biomass fuels.Energy Education Science and Technology Part A: Energy Science and Research. 2012;28(2):749-758.